Sticker

Sticker are ordinarily printed from paper or plastic foil (PVC, PE, PP, PET), mostly unilaterally and are provided at the back with a adherent, so that they can be fastened on all only conceivable surfaces. For the protection of the adherent it is provided with an masking paper. The masking paper can be printed for advertisement or information one to 4-coloured. How weatherproof a sticker is, depends on the used carrier material of the sticker and the surface refining. The most important qualities of PE foil: Polyethylen owns a high permanence by acids, lyes and other chemicals. PE softens at temperatures of more than 80 degrees Celsius and is without printing pretreatment only badly. Solar irradiation can lead with PE to a brittleness.

The most important qualities of PP foil: The chemical permanence of Polypropylen is dependent on the temperature. The most important qualities of PVC foil: Foil PVC does not rot and is resistant to water and resistant to air.

There are clear stickers and stickers which are printed on opaque foil. Also with the form there are many passed away possibilities. Thus there are round stickers, angular stickers (alternatively with rounded corners), oval stickers and stickers, the quite individual ones punched or plotted are.

Business sticker for advertisement and information

Here press, non-smoker, care glass, returnable bottle, leisure park, dance sometimes again, fit for good who does not know you, advertising sayings and tip stickers. Thus the sticker fulfils his function as an advertising bearer and bearer of information, e.g., as a bar code sticker, association sticker, parcel sticker, test label, embroiderer and Branding label.

More and more often 3D sticker are also used for PC Branding.

Sticker printing and design

Sticker and embroiderer can find to too many different occasions use and also fulfil many different functions. Hence, it is important to think about how one can produce own sticker, where from one can get suggestions and perhaps presentations which program is suited for the production of the sticker best of all where the sticker should be printed and a lot a lot more.

The creation of a sticker - and he is still so easy - should fulfil some basic terms: The sticker may look not monotonous, however, no weird coexistence, but a harmoniously comprehensive picture should show, therefore, must be respected to CI and CD with sticker creation for companies. To the creation of a sticker the following elements which achieve differently used different effects are available. These are: Sharp, line; surface, body / 3D, colour. The centre of the creation of a sticker always lies in the computational middle. The main focus gives the optical middle and can be shifted. The line plays as an imaginary or real line in the sticker creation a big role. The horizontal line provides rest and stability. In her striving upwards, the perpendicular is less stable again, however, strength and sublimity shines from. The sloping line looks lively against it, unusual and worried. She lends strong expression and vitality to a sticker. The surface of a sticker can be split symmetrically, asymmetrical and after the golden cut. The body of a sticker, mostly from paper or plastic, influences with his surface optics strongly the effect. Besides the effect and durability can be strengthened by improving, e.g., with UV varnish, still.

3D Sticker

3D sticker, 3D label, Case Badges are plano printed stickers with a doming varnish. 3D coating is used with sticker to the effective strengthening of the effect from pressure motives on polyester, PVC and metallic foils. Whether as a logo sticker on products or as an advertising sticker, with 3D embroiderer you strike. We produce standard 3D sticker or 3D embroiderer on a white or metallic foil in the digital pressure. For 3D sticker other printing methods can be also used, e.g., offset printing, silk screen, thermo transfer pressure, transfer pressure or UV offset printing. Our 3D stickers own isocyanat-free doming varnish, are UV-resistant and resistant to weather and own good Klebeeigenschaften. Standard 3D stickers in print on white foil our standard 3D etiquettes are produced on a white foil in the digital pressure and are provided with a 3D coating. Foils of 3 m, Orafol/Oracal and Avery with a medium-term however very good glueing find use here. The etiquettes are UV-resistant and resistant to weather. Prestige 3D stickers in print on reflecting foil, chrome foil, silver foil or golden foil our prestige 3D etiquettes are printed on optically high-quality foil and are 3D-coated. For the application golden foils or silver foils as well as reflecting foils or chrome foils come according to customer wish. The 3D embroiderers are UV-resistant and resistant to weather and own according to foil application a long or medium-term live cycle (base foil).

Sticker Advertisement

Advertisement it sticks or like the vernacular says "in memory sticks". Advertising sticker that is advertisement on sticker and sticker for advertisement. Sticker, advertising means with wide application field, many ranges of application and infinite target groups. Should the advertising stickers be suitable for the outside application, the printing inks must be weatherproof and be lightproof. If the pressure on a PVC adhesive foil occurs, the stickers are long-lasting. The use of high-quality UV printing inks guarantees for excellent colour reproduction of your pressure motives for longer time, also in the undeveloped outskirt area. The UV permanence with sticker and embroiderer depends very much on the light fastness steps of the used printing inks. The gradation occurs on a scale, called woollen scale, from 1-8 and 8 the meaning has very well. The higher the quality of the used colour is, the longer the colours under influence of light remain luminous and UV-continual. Stickers and embroiderers from PVC foil have a good weather permanence. A low weather permanence white however paper sticker sticker from PE or foil PP on. These are not suitable or only partly - for a short time - for an application outside, because the carrier foil or the printing inks are not water resistant and UV-continual. The pressure of advertising stickers occurs at a reasonable price in the offset CMYK collective pressure, for smaller numbers of pieces in the digital pressure or for special application as for example Hinderglasaufkleber or clear stickers in the silk screen. TKP - thousand-contact price of advertisement by sticker is natural of it dependent at which place of the advertising stickers is used, however, might be substantially lower than the CPC - cost by click on the Internet. Advertising stickers are a reasonable kind of lasting advertisement for companies, independent, to associations and clubs.

Sticker for safty and health

Fire prevention and escape route marking, product marking, warning mark or product seal, the sticker offer for security sticker and marking by sticker in the commercial area is big. Whether according to warning sticker. BGV 48, test seal and test badges to VDE or continuing to glow or reflective rescue signs, all these stickers serve the security and are mostly printed on special foils, e.g., avery.

Sticker for products

Sticker for product marking and consumer's protection s.g. Product sticker. Especially in the chemicals-juridical regulations dangerous products markings are planned to prevent accidents with these products for noxious, toxic as well as children.

Sticker assembly

Assembly tip for foil sticker without transfer foil or assembly foil. Sticker assembly only at temperatures more than 10 degrees of C. Subsoil thoroughly from fat and dirt clean. adherent with relaxed water moisten, put on protective paper in the sticker departing, sticker flatly and press with an elastic role. The wetting of the adherent of the sticker is also recommended for sticker in bigger format. Then the sticker can be aimed, before pressing still easily. The optimum adhesion is reached only approx. 24 hours after the stick down.

Sticker and light fastness

We understand sticker and light fastness under the light permanence of sticker her robustness against influence of light without direct effect of the weather. Light fastness is determined only in full tone colours. The light fastness graduation passes of a 8-stage scale called "woollen scale". The following light fastness steps arise from it:
1 = very slightly
2 = slightly
3 = moderately
4 = quite a good
5 = a good
6 = very a good
7 = excellently
8 = very well

Nevertheless, sticker for associations and institutions

With association sticker one thinks first of sports associations or? Indeed, there is a huge number of people for a relief organisation active are, e.g., Red Cross, technical charitable organisation or voluntary fire brigade and this with pleasure would like to point. Mostly round stickers there them are suited for these institutions well with the logo harmonise. For these often charitable associations the price of member's sticker plays of course a strong role. Our stickers in the UV offset printing are interesting here, because you own a very good price / achievement and hold long, also in the undeveloped outskirt area.

Stickers remove

Sticker with non constantly glue can be removed as a rule within 12 months without remains.

Sticker for the tourism

The city coat of arms as a sticker or the holidays island as a sticker for the rear window, so one knows you, to sticker of the vacationers with pleasure in the kiosk buys or takes in the tourist information with pleasure free of charge. We make sticker in every desired special form, weatherproofly and resistant to light, e.g., for leisure parks, experience swimming-pools, camping bibs, holidays regions, to regional destinations, the pro for sticker out of the net.

Stickers for hotels and catering trade

Beside security sticker and marking by sticker in the commercial area come in the Gastro area of Address sticker or postcard sticker for the use.

Stickers for Beauty and Wellness

Sticker for wellness centre or Beautyfarms are to be ascribed neither so completely to the tourism nor the catering trade. In this branch a high claim exists in the quality of advertising means. The stickers should own brilliant, natural colour reproduction, importantly for sticker with Skin picture. Our stickers own these qualities and, besides, are still weatherproof and resistant to light.

Bumper Sticker

No special qualities own car of stickers car of stickers compared with other weatherproof stickers lightproof. However, a big interest the car Sticker is not produced in the offset printing separate exists of coloured geplotten foils, mounted on transference foil. The state times of the light permanence are higher here, indeed, only full-coloured motives can be produced as with the silk screen.

Sticker, glue qualities

The liability of the stickers on surfaces is depending on the state of the respective surface and the glues a quality of the stickers. You can take the Klebekraft from the data sheet of the foil in the production the sticker is used. In general there is the differentiation for sticker glue in constantly and non constantly. Stickers with non constantly glue can be removed within the given time span without remains.

Sticker creation and design

To the stickers creation counts: Can the elective colour be well printed in cmyk or do I use special colours? Are my writings from the likely consideration distance good to read? Does my advertising message become clear to the viewer immediately?